Vehicle Fitment:

1994-1998 MUSTANG GT

Want to strengthen your Mustangs rear end with the same equipment we use on our own Mustangs? This Brenspeed Rearend Build Package is the exact same parts we run on our NMRA race cars and cars that drive daily on the street. We have been using this package for years and not one time have we broke an axle even running 1.4 60 foot short times on our shop car running 10 flat in the quarter mile! We have saved you some money creating this package so you can get everything you need at a discounted price.

INCLUDED IN THIS PACKAGE:

31 Spline Moser Axles :

Moser Engineering 1994-1998 Mustang replacement axle. Made from the same custom alloy used in their racing axles, these c-clip axles are 25-30% stronger than its OEM counterparts and are prepped for ABS exciter rings.

ABS Tone Rings:

Original equipment Ford ABS Tone Rings are included so you will not have to attempt to press your old tone rings off your axles. Trying to remove used tone rings often result in tone ring failure.

Moser Wheel Studs:

You get your choice of factory length wheel studs or 3 in. long wheel studs for racing applications.

Eaton POSI Differential:

This Eaton brand differential is a great upgrade. Not only is it stronger than your stock unit but it will also guarantee both tires are putting the power to the ground. This 31 spline Eaton is a direct replacement part and used in Brenspeed Mustangs for race or street applications.

Would you like to upgrade your Diferential to a True Trac? No problem, we have you covered. The True Trac maximizes traction by delivering 100% of the torque to both drive wheels. It is engineered to keep both wheels in a constant drive mode, and has the ability to automatically allow wheel speed differentiation when required.

Choose Upgrade Differential from the drop down list above to add to the order.

Ford Racing Performance Ring & Pinion:

You get your choice of Ford Racing 3.55, 3.73, or 4.10 ratio gears. Ford Racing gear sets are not only the best on the market but the only gear set we install at Brenspeed.

Master Installation Bearing and Shim Kit:

Our master installation kits include shims, crush sleeve, pinion and diff bearings, gasket or gasket sealer, pinion seal, new ring gear bolts, and marking compound. This complete kit is a must have for a gear install.

Fluids for your installation:

We include 3 quarts of Valvoline High Performance Gear Oil for your installation. We also include a bottle of the proper friction modifier so your new Eaton differential will function properly.