These all-new Edelbrock E-Force Mustang supercharger systems for the 4.6L 3V will allow you to boost your Mustang to a very impressive 466 hp and 439 ft.-lbs. of torque. These systems are exclusively designed by Edelbrock to provide instant, reliable, and safe horsepower for a stock Mustang 4.6L with only 5 psi of boost for minimum stress on your engine. The core of these systems is the all-new Eaton Gen VI 2300 TVS supercharger rotating assembly. Eaton's assembly features a 4-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise, and quiet operation for excellent drivability. These supercharger assemblies have been integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. Edelbrock's unique inverted supercharger assembly is placed low in the valley, allowing for an incredible industry-leading 15 in. of intake runner length for maximizing low-end torque. An integrated bypass valve helps to eliminate parasitic loss under light throttle for improved mileage potential. These systems breathe through specially engineered 85mm electronic throttle bodies matched with the most unique and efficient inlet configuration on the market. This combination results in a shorter, less restrictive intake path for improved airflow without the need for a jack-shaft. Keeping the air cool is a 110 sq. in., high-capacity, air-to-water intercooler and a dual core, low-temp heat exchanger. These Edelbrock E-Force Mustang supercharger kits are complete packages which include a supercharger/intake assembly, fuel injectors, spark plugs, a steel belt tensioner brace, and a flash tuner with proper calibration.

The core of the supercharger system is the all new Eaton Gen VI TVS¨ Supercharger rotating assembly. Eaton's assembly features a four lobe design with 160ˇ of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. The supercharger assembly has been integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between a gasket surface. Edelbrock's unique inverted supercharger assembly is placed low in the valley, allowing for an incredible industry leading 15" of intake runner length for maximizing low end torque. An integrated bypass valve helps eliminate parasitic loss under light throttle for improved mileage potential.

The supercharger system breathes through a specially engineered 85mm electronic throttle body matched with the most unique and efficient inlet configuration on the market. This combination results in a shorter less restrictive intake path for improved air flow, eliminating the need for a jack-shaft. Keeping the air cool is a 110 square inch high capacity air to water intercooler and dual core low temp heat exchanger. This intercooler is the largest available on the market today.

Finally... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks! The supercharger assembly and matching coil covers are uniquely styled to give your engine compartment a custom look. All of these components have been black powdered coated for durability with highlighted fins and Edelbrock logo for a timeless look.


Edelbrock E-Force Supercharger Kit For 4.6L Mustang Features:

• Complete system that maximizes efficiency and performance by minimizing air restriction in and out of the supercharger
• Internal assembly made by Eaton, the same rotors used in the new Corvette ZR-1
• Self-contained oil system with 100,000-mile service interval (no drilling or plumbing required)
• Installs under the stock hood while maintaining factory accessories
• 2300cc (140 cubic inch) Eaton¨ TVS Gen VI Rotor assembly
• Unique intake manifold design with 15" long runners for increased low-end torque
• Complete package includes supercharger/intake assembly, air inlet with 85mm throttle body, fuel injectors, air-to-water intercooler, spark plugs, flash tuner with proper calibration
• The most efficient system available - 466 HP and 439 ft./lbs of Torque on only 5 lbs. of boost!
• Made in the USA for absolute quality and performance!

We will contact you for the shipping location after you purchase.

Convenient 0% interest Financing Available!

We know how hard it can be to come up with a large amount of money to get that Mustang part you have been wanting. To help solve this problem we have found a great way to get your part now and pay later. Brenspeed can now offer financing options for your performance part and even installation!

The process is simple. Just call us and we can go over your options and how to get 3 months, 6 months, or even 12 months same as cash with 0% interest. Now you can get that intake and tuner or even supercharger now and pay for it later. Even if you do not choose to pay the financing off in say 3, 6, or 12 months GE Money will turn your 3, 6, or 12 month same as cash into a monthly payment with a set interest rate.

The entire approval process only takes 5 minutes once we receive your application. Once you are approved we provide you with your product or service immediately. Call us to receive an application and get all the details on this easy to use financing option.

Call us at 574.594.9559 and simply ask for a financing application. We can answer any further questions you may have at that time.