Home | 15-17 Mustang | Suspension | Sway Bars | 2015-21 Mustang BMR End Link Kit for Sway Bars, Rear ELK014

2015-21 Mustang BMR End Link Kit for Sway Bars, Rear ELK014

Product Reviews for 2015-21 Mustang BMR End Link Kit for Sway Bars, Rear ELK014

Description
Reviews

The amount of force exerted on the sway bar end link is staggering—especially if you’ve
upgraded to an aftermarket sway bar, like BMR Suspension's SB045. The stock end
links are weak and can bend or break. BMR’s ELK014 end link kit allows you to push
your S550 Mustang to the limit without fear of end link deflection. BMR manufactures
the ELK014s out of heavy-duty steel hex bar stock. The right and left hand threaded ball
joint-style tie rods are manufactured by Proforged and offer huge advantages over other
companies’ end links that use rod ends. Ball joints allow for more articulation than a rod
end, which is what you want when you hit the track. BMR’s ball joints are greasable,
which you won’t find on their competitor’s end links. This ensures long life and flawless
operation, and they make less noise than rod ends. The ball joints attach to the sway
bar with 12mm studs, while the ball joints attach to the end link tubes with ½-inch studs.
This combination of components gives you a huge increase in strength over stock end
links.

BMR designed the ELK014 sway bar end link kit for street performance, autocross, and
road race applications. BMR’s heavy-duty adjustable end links are designed to reduce
deflection normally seen with stock sway bar end links. End link deflection means
reduced sway bar rate, leaving you with increased body roll and reduced handling
ability. BMR’s ELK014 will not deflect, giving you the full potential of the sway bar—no
matter how hard you drive. The adjustable links allow for on-car adjustability, giving you
the ability to easily correct sway bar geometry and working angles on lowered S550s,
as well as cars with adjustable sway bars. The ELK014 adjustable end links give you
the ability to preload the sway bar to fine-tune your suspension setup for any track.
Combine this with BMR’s adjustable sway bars, and you can dial-in your car for the
street or any track you may drive on.

BMR Suspension’s ELK014 sway bar end links are available in a durable black finish for
long-lasting good looks.

Features:

Fits all S550 Ford Mustangs
On-car adjustable
Proforged ball joint-style tie rods
Greasable for long life and flawless operation
12mm/1/2-inch studs for increased strength
Heavy-duty steel hex bar stock construction
Dramatically reduces sway bar end link deflection
Designed to withstand high compression loads
Allows for proper sway bar working angles and geometry on lowered S550s
Allows for preloading of sway bars to fine-tune suspension setup
Designed for street performance, autocross, and road race applications
Durable black finish
Proudly made in the U.S.A.