2010-15 Camaro W175FF (2.9L) SC Competition Kit / Intercooled / 9-10psi / Black No Flash Tool Included
Product Reviews for 2010-15 Camaro W175FF (2.9L) SC Competition Kit / Intercooled / 9-10psi / Black No Flash Tool Included
Description
Reviews
Since 1987, Whipple Superchargers™ have been the pioneers and leaders
of twin-screw supercharging. Whipple was the first to bring positive
displacement technology to fuel injected, emissions legal GM
applications. With nearly 30 years of GM twin-screw supercharging
experience, Whipple's team have now engineered the most powerful
intercooled twin-screw SC system available today. The competition
supercharger is race proven on approved by GM Racing as the chosen
supercharger for the factory built COPO Camaro's.
With
all the latest technology, the all new Whipple system makes more power
than any other positive displacement supercharger system on the market
giving you tire frying, neck whipping power that will give you a grin
from ear to ear. The new Whipple system is 100% complete and is
designed for stock engines but has enough capability to work with
heavily modified engines. The all-new system features Whipple's massive
oversized air-to-water intercooler for unmatched cooling capacity, a
unique front feed W175ax (a whopping 2.9 liters) integrated Whipple
twin-screw supercharger that reaches 99% volumetric efficiency and
industry leading power potential.
The
unique intercooled bypass system offers better acceleration, less
tip-in knock and less than 1hp of consumption during cruising for
excellent fuel economy. While others claim, Whipple Superchargers
simply deliver more power per pound of boost than any other
supercharger on the market today. Get the same technology powering
today's COPO Camaro's!
THIS
PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION
WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED
BY SPECIFIC REGULATORY EXEMPTION (VISIT THE “EMISSIONS” PAGE AT
HTTP://WWW.SEMASAN.COM/EMISSIONS FOR STATE BY STATE DETAILS.
LEGAL
IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR
REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY.
IT
IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO
ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND
REGULATIONS.
THIS
POLICY ONLY APPLIES TO INSTALLERS AND/OR USERS WHO ARE LOCATED IN THE
UNITED STATES, HOWEVER CUSTOMERS WHO RESIDE IN OTHER COUNTRIES SHOULD
ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS.
Features
Front
entry W175ax (2.9 liters) Whipple twin-screw supercharger that
significantly outperforms competitions 1.9L and 2.3L roots-type systems
26%
bigger than the 2.3L roots
65%
bigger than the 1.9L roots
Front
feed supercharger utilizes precision ground helical cut gears vs a
problematic belt.
Integrated
casting to minimize bolt on pieces, adapters, leaks and flow
restrictions
Integrated
Crusher ™ venturi shaped inlet for maximum airflow capacity and minimal
rotor cavitation
Integrated
Crusher ™ 112mm round inlet outflows smaller 90 and 93mm inlets such as
other Eaton based systems
Big
Mouth Whipple Crusher ™ plastic air inlet (or optional carbon fiber)
for increased velocity and lower inlet temps vs. steel and aluminum
tubes
Integrated
design allows for oversized intercooler core compared to other smaller
intercooler cores giving Whipple lower air charge temps which allows
more boost and timing to be run on pump gas
Massive
air-to-water aluminum bar-plate intercooler offers more cooling than
any other positive displacement system available
Whipple
Superchargers massive oversized intercooled air-bypass system for
industry leading reduction of burst knock and incredible fuel economy,
no ridiculous fabbed steel tubes or systems that circulate hot air
Self-contained
oversized oil system for dramatically reduced oil temps in even the
most demanding conditions
Exclusive
3x5 rotor combo for significant increase in airflow under the curve
than less efficient 4x6 rotor combo
Zero
turn inlet allows for decreased induction losses when compared to rear
inlet systems and 180deg bends
Center
discharge port for better cylinder to cylinder distribution then other
twin-screws with cobbled together billet adapters and forward facing
discharge
Discharge
down design allows for less pressure loss which gives more power at
lower boost levels
Top
mount design allows for cooler operation then upside down SC's that
conduct heat from engine and are trapped by runners and covers, causing
hotter manifold temps and less power per pound of boost
More
boost at the "hit" than any other twin-screw
Flat
torque curve for incredible acceleration
Oversized
heat exchanger for incredible intercooler water temps
Fits
under factory hood with no modifications*
No
internal modifications required
Completed
installation looks factory installed, not some cobbled together kit
with multiple billet adapters
Kits
come complete with all necessary parts and hardware for installation
Unique
oil level sight glass for easy oil level and quality check, no dipstick
to bind or misread
Plug
and play wiring with male and female connections
High
flow air filter system (50-state legal filter system), coolant
reservoir is maintained
Proven
6-rib belt system with heavy duty spring loaded tensioner and
adjustable idler system
Optional
10-rib belt system with matching billet pulleys
Stainless
steel jack-shaft with unique plastic cover (or optional carbon fiber)
for increased safety
OEM
quick connect fittings for easy installation, no ugly brass or steel
fittings on the SC
Complete
kits, Tuner kits and Hot Rod kits are available
Available
in wrinkle black, polish or any custom color
Easily
upgradeable with big cold air intakes and bigger throttle bodies (102mm
or 109mm)
Instant
boost at the touch of the throttle
3
minute pulley changes
*2014-2015
Models require modifications to hood vent or use of the Whipple vent.