BRISK Silver Racing GR12YS Spark Plug 14mm thread, .708"(19mm) reach,
5/8'(16mm) hex, tapered seat, projected tip, resistor, fine wire 1.5mm
Silver center el., tapered ground electrode.
Brisk
GR12YS Silver Racing Spark plug is designed for forced induction
applications and nitrous applications. Brisk GR12YS Silver Racing Spark
Plug replaces NGK heat range 6 and 7. Brisk Silver Racing
plugs have a better ignitability than conventional performance spark
plugs, and offer better performance and reliability in high boost,
nitrous or high compression applications. Silver is an element with the
most free electrons, and is the best electrical and thermal (heat)
conductor of all metals! Better than gold, copper ...and many times
better than Iridium. The Brisk Silver Racing plugs have a fine wire
center electrode (not just the tip), which gives more room for
insulator between the center electrode and spark plug shell. More
insulation results in a durable spark plug with high dielectric
strength - the most important spark plug parameter in forced induction
applications. Brisk Silver Racing spark plugs have helped Tim Lynch and
Steve Petty to keep the A/F mixture lit and set 4 New World Records
since they started using them in their extreme 3,000+Hp 6.66sec @
223.5mph Twin Turbo 10.5 Outlaw Mustang, and can do the same for you.
In street applications, the greatest advantage is a powerfull spark,
improved performance, low ignition voltage requirements, excellent heat
dissipation at full load and excellent anti-fouling resistance under
light load operation. Brisk Silver Racing Spark Plugs are available for
all makes and models, so order yours today!
Technical information:
Materials:
Silver is the best thermal (heat) conductor of all metals - Allows for
a wide spark plug heat range
Excellent
heat dissipation under max. power
Excellent
resistance to fouling under light load operation Silver is the best
electrical conductor of all metals
Most
free electrons
Best
power delivery
Most
powerfull spark Construction: 1.5 mm Silver Fine Wire Center Electrode
Low
ignition voltage requirements (easier for spark to jump over)
Reduces
stress and wear on your coil and other ignition components
Fires
properly even if partially fouled, where standard plugs will fail
Excellent
for:
Standard
and High compression engines
Forced
induction applications
Nitrous
applications
Methanol/ethanol
injection
LPG
o Any hard to ignite type of fuel applications
High
RPM race engines where is a short time for the ignition coil
saturation
Beneficial
even for old vehicles with a weak ignition systems and/or excessive oil
consumption Tapered or Cut-Back Ground Electrode
Provides
sharp edges for easy spark discharge
Excellent
spark exposure to the air/fuel mixture
Faster
flame front propagation in the initial stages of ignition due to
reduced ground electrode obstruction High dielectric strength
Fine
wire center electrode (not just tip) increases the thickness of
insulator between the center electrode and the spark plug shell for
higher mechanical and dielectric strength.